GoPro HERO5 Black

The presence of Wi-Fi There
Media Type Flash Memory
Colour Black
Matrix (light sensor) 12 megapixel, CMOS
LCD Monitor 2 "touchscreen LCD
Movie Mode:

• 4K (3840x2160) - 30 frames per second
• 2.7K (2704x1520) - 60 frames per second
• 1080p (1920x1080) - 120 frames per second
• 720p (1280x720) - 240 frames per second

Photographing mode:

• Resolution: 12 MP
• Continuous shooting up to 30 frames per second
• Format: RAW / JPEG

Recording audio:

• Stereo 2.0
• Audio format: WAV
• Built-in three microphone

Power battery 1220 mAh

MicroSD memory card
Connectors:

• miniUSB
• microHDMI
• 1 x 1/8 "(3.5 mm) Stereo Mini
• Microphone

Here is a complete list of supported video shooting permissions:

4K @ 30fps;

2,7K @ 60 frames per second;

2,7K 4: 3 @ 30 frames per second;

1 440P @ 80 frames per second;

1 080p @ 120 fps;

960P @ 120 frames per second;

720p @ 240 fps;

480p @ 240 fps.

Features

• Despite the more powerful filling time HERO5 Black is the same as the previous generation of cameras, at the expense of slightly increased battery capacity, component 1220 mAh vs. 1160 mAh in HERO4 Black.
• HERO5 Black has a built-in GPS module, and it is a big plus for those who like to organize your library in the place of shooting.
• Unlike the previous generation, HERO5 writes the sound in stereo.
• For an extra fee you can purchase a subscription GoPro Plus - a private cloud storage with built-in editor, which will be filled in automatically captured photos and videos. However, for this system, the camera must be connected to the mains adapter that is not supplied.
• in total

MAINTENANCE

Follow these guidelines to get the best performance from your camera:

• The camera is waterproof to 33’ (10m)—no housing needed. Ensure that the doors are closed before using the camera in or around water, dirt, or sand.

• Before closing the doors, be sure the seals are free of debris. If needed, clean with a cloth.

• Before opening the doors, be sure the camera is free of water or debris. If needed, rinse the camera with fresh water and dry it with a cloth.

• If sand or debris hardens around the doors, soak the camera in warm tap water for 15 minutes and then rinse thoroughly to remove the debris before opening the doors.

• In wet environments, dry the touch display with a soft cloth so that it

registers your touch.

• For best audio performance, shake the camera or blow on the mic to remove water and debris from the microphone holes. To prevent damage to the internal waterproof membranes, do not use compressed air to blow into the mic holes.

• After every use in salt water, rinse the camera with fresh water, and dry with a soft cloth.

• To clean the lens, wipe it with a soft, lint-free cloth. If debris becomes lodged between the lens and the trim ring, flush it out with water or air.

Do not insert foreign objects around the lens.